Home / Products / DTH Tools / QL80 DTH Hammer
QL80 DTH Hammer
QL series · with foot valve · hole range Φ195-254 mm
Structure · Parts list
Numbers match the sectional view above | 16 parts in total
| No. | Part | Weight | Part No. |
|---|---|---|---|
| 01 | Top Sub | 42kg | 01-QL80-01 |
| 02 | Adjuster Shim | 0.2kg | 01-QL80-02 |
| 03 | O Ring | 0.02kg | 01-QL80-03 |
| 04 | Check Valve | 1.3kg | 01-QL80-04 |
| 05 | Spring | 0.1kg | 01-QL80-05 |
| 06 | Rubber Buffer | 0.4kg | 01-QL80-06 |
| 07 | Valve Seat | 12.7kg | 01-QL80-07 |
| 08 | Inner Cylinder | 9.1kg | 01-QL80-08 |
| 09 | Piston | 41kg | 01-QL80-09 |
| 10 | Outer Cylinder | 64kg | 01-QL80-10 |
| 11 | Guided Sleeve | 2.9kg | 01-QL80-11 |
| 12 | Stop Ring | 1.2kg | 07-QL80-12 |
| 13 | O Ring | 0.02kg | 07-QL80-13 |
| 14 | Adjuster Shim | 0.2kg | 01-QL80-14 |
| 15 | Drive Chuck | 12kg | 01-QL80-15 |
| 16 | Drill Bit | — | 01-QL80-16 |
Product description
The QL series is known for low pressure and high air volume, with a large piston area and high impact energy per blow — ideal for large-diameter water wells and bench blasting, efficient already at 1.0–1.7 MPa.
A DTH hammer is a piston-type air tool: compressed air enters through the top sub, opens the check valve and is routed by the valve seat to drive the piston back and forth in the inner cylinder; the piston strikes the bit shank and the energy breaks the rock. Exhaust leaves through ports in the piston case, and flushing air carries cuttings out of the hole. The drive chuck transmits rotation, while the stop ring and guided sleeve keep the piston stroke and alignment.
Selection guide: OD Φ180 mm, matching hole Φ195-254 mm, thread API4 1/2″REG, matched with QL80 bit; working pressure 1.5–3.3 MPa, air consumption 26 / 34 m³/min. Use the upper pressure limit in hard rock; reduce pressure where water inflow is heavy to avoid re-grinding cuttings.
Suitable for water wells, bench blasting, quarries, geothermal drilling and foundation anchoring in medium-hard to hard rock. Bits, subs and packaging can be customized to drawing or sample; standard models are in stock and bulk lead times are confirmed on order.
Technical parameters
Whole-unit parameters | air consumption at 1.0 / 1.5 MPa
| Model | QL80 |
| Type | with foot valve |
| Outer Ø | Φ180 mm |
| Hole Range | Φ195-254 mm |
| Length (less bit) | 1471 mm |
| Weight | 187 kg |
| Thread | API4 1/2″REG |
| Bit shank | QL80 |
| Air pressure | 1.5–3.3 MPa |
| Air consumption (1.0 / 1.5 MPa) | 26 / 34 m³/min |
