Home / Products / DTH Tools / SD6 DTH Hammer
SD6 DTH Hammer
SD series · hole range Φ150-190 mm
Structure · Parts list
Numbers match the sectional view above | 14 parts in total
| No. | Part | Weight | Part No. |
|---|---|---|---|
| 01 | Top Sub | 20.3kg | 01-SD6-01 |
| 02 | O Ring | 0.02kg | 01-SD6-02 |
| 03 | Check Valve | 0.8kg | 01-SD6-03 |
| 04 | Spring | 0.05kg | 01-SD6-04 |
| 05 | Rubber Buffer | 0.3kg | 01-SD6-05 |
| 06 | Valve Seat | 5kg | 01-SD6-06 |
| 07 | Inner Cylinder | 4kg | 01-SD6-07 |
| 08 | Piston | 23.5kg | 01-SD6-08 |
| 09 | Outer Cylinder | 34.5kg | 01-SD6-09 |
| 10 | Stop Ring | 0.5kg | 01-SD6-10 |
| 11 | O Ring | 0.01kg | 01-SD6-11 |
| 12 | Guided Sleeve | 1.6kg | 01-SD6-12 |
| 13 | Drive Chuck | 8kg | 01-SD6-13 |
| 14 | Drill Bit | — | 01-SD6-14 |
Product description
The SD series covers 4–12 inch with strong versatility and interchangeable parts — the most widely used range for water wells, geothermal and exploration; one rig covers several hole sizes by changing hammers.
A DTH hammer is a piston-type air tool: compressed air enters through the top sub, opens the check valve and is routed by the valve seat to drive the piston back and forth in the inner cylinder; the piston strikes the bit shank and the energy breaks the rock. Exhaust leaves through ports in the piston case, and flushing air carries cuttings out of the hole. The drive chuck transmits rotation, while the stop ring and guided sleeve keep the piston stroke and alignment.
Selection guide: OD Φ142 mm, hole range Φ150-190 mm, thread API3 1/2″REG, matched with SD6 bits; recommended working pressure 1.0–1.7 MPa, air consumption 20 / 28 m³/min. Use the upper pressure in hard rock and reduce it in wet formations to avoid regrinding cuttings.
Suitable for water wells, bench blasting, quarries, geothermal drilling and foundation anchoring in medium-hard to hard rock. Bits, subs and packaging can be customized to drawing or sample; standard models are in stock and bulk lead times are confirmed on order.
Technical parameters
Whole-unit parameters | air consumption at 1.0 / 1.5 MPa
| Model | SD6 |
| Type | — |
| Outer Ø | Φ142 mm |
| Hole Range | Φ150-190 mm |
| Length (less bit) | 1277 mm |
| Weight | 99 kg |
| Thread | API3 1/2″REG |
| Bit shank | SD6 |
| Air pressure | 1.0–1.7 MPa |
| Air consumption (1.0 / 1.5 MPa) | 20 / 28 m³/min |
